Ensuring Constant Temperature: The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Fast Heating: It is based on a temperature difference of 60°C (140°F) between incoming water and hot water, providing 200 kBtu/hr of freshwater. Therefore, it can heat the pool by transferring heat in a short time, so you don't have to wait very long. Safe to Use: It is safe to use because it does not catch fire, leak, burn during operation, which brings great reassurance to you. More Water-saving: It does not waste water during operation and tries to make the best use of every drop of water, so it is more water-saving.Easy to Clean: You can easily clean it without much effort and time because of its smooth surface and fewer gaps. Wide Application: It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Threaded Connection Ports: The heat exchanger has four threaded connections ports that can connect other tubes more firmly and tightly, which is uneasy to fall off and affect the heat transfer.
304 Stainless Steel: The heat exchanger is made of 304stainless steel so that it is rustproof and saltwater resistant. Therefore, it is suitable for chlorine or saltwater pools and spas. It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc.
Heat Transfer Area: 0.45m²/4.8ft². Hot Water Flow Rate: 30L/Min (8L/Min). Cold Water Flow: 250L/Min (66L/Min). Side of Hot Water Pipe: 1inch FPT.
Same Side Port: 1 1/2 FPT. Packing Size: 541919cm/217.57.5inch. Product Size: 48.514cm/19.095.5inch.
Connection Port Diameter: 3.8cm/1.5inch, 2.54cm/1inch. The product needs basic assembly. Professional would be highly recommended. 1 x Stainless Steel Heat Exchanger.2 Sets x Fixed Brackets. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.